A boat lift costs $2,500 to $25,000 installed on Lake Travis and Lake Austin, and most owners land between $5,000 and $15,000 for an electric cable lift sized for a runabout, pontoon or wake boat. PWC ports sit at the bottom of that range and large hydraulic lifts at the top. Those are Longhorn Docks proposal figures from 2025 to 2026, not national averages, and they include the lift, mounting hardware, electrical hookup and a load test with your boat.
This guide breaks the number down four ways: by lift type, by boat weight, by what you are paying for inside an installed price, and by brand. If you already know what you need, our boat lift installation page covers how we size and fit a lift to your dock.
How Much Does a Boat Lift Cost Installed in Texas?
Start with lift type. It sets the price more than anything else, because the drive system (cable winch, hydraulic cylinders or air tanks) is most of the equipment cost.
| Lift type | Fits | Installed cost |
|---|---|---|
| PWC lift or drive-on port | Jet skis and small PWCs, one per port | $2,500 to $5,000 |
| Electric cable lift, 4,000 to 6,000 lb | Runabouts, pontoons, bass boats | $5,000 to $10,000 |
| Electric cable lift, 6,000 to 10,000 lb | Wake boats, larger pontoons, cuddies | $9,000 to $15,000 |
| Hydraulic lift, 8,000 to 12,000 lb | Wake boats and cruisers that go out daily | $12,000 to $20,000 |
| Hydraulic lift, 12,000 lb and up | Large cruisers, tritoons with twin engines | $18,000 to $25,000 or more |
| Floating hydro-pneumatic lift (HydroHoist type) | 4,400 to 32,000 lb, on floating docks | $9,000 to $30,000 |
| Any lift added during a new dock build | Any of the above | 10 to 20 percent less than a retrofit |
Basis: Longhorn Docks proposals, 2025 to 2026, Lake Travis and Lake Austin. Installed cost includes the lift, mounting hardware, electrical hookup and testing. Dock reinforcement, remote packages and canopies are itemized separately below.
The rule of thumb we use on the dock: under about 8,000 pounds loaded, a cable lift does the job and costs less. Above that, or for a boat that goes in and out most days, go hydraulic. A floating hydro-pneumatic lift is the usual answer on a Lake Travis floating dock because the lift floats with the dock and nothing hangs below the frame.
Boat Lift Cost by Boat Weight
Lift capacity is the second price driver, and most owners under-size it. Take the boat’s dry weight from the spec sheet, add fuel, water, batteries, ballast, gear and the people on board, then add 20 percent. That is the capacity you buy. A 5,500-pound wake boat with full ballast is closer to 8,000 pounds in the cradle.
| Loaded boat weight | Typical boats | Cable lift installed | Hydraulic lift installed |
|---|---|---|---|
| Under 1,500 lb | PWC, jon boat, small sailboat | $2,500 to $5,000 | Not usually offered |
| 1,500 to 4,000 lb | Bass boats, 18 to 20 ft runabouts, small pontoons | $5,000 to $8,000 | $10,000 to $13,000 |
| 4,000 to 6,000 lb | 21 to 23 ft bowriders, 22 ft pontoons | $6,500 to $10,000 | $11,000 to $15,000 |
| 6,000 to 8,000 lb | Wake boats, 24 to 26 ft pontoons and tritoons | $9,000 to $13,000 | $12,000 to $17,000 |
| 8,000 to 12,000 lb | Loaded wake boats, 26 to 30 ft cruisers | $12,000 to $15,000 | $14,000 to $20,000 |
| 12,000 to 16,000 lb | 30 to 34 ft cruisers, big tritoons with twins | Rarely a good fit | $18,000 to $25,000 |
| Over 16,000 lb | Large cruisers | Not offered | $25,000 to $40,000 |
Basis: Longhorn Docks proposals and manufacturer price lists, 2025 to 2026. Installed on an existing dock with power already at the dock.
Two things to notice. Cable lifts stop being a good buy above about 10,000 pounds; the cables, pulleys and motor all work hard and the maintenance climbs. And the hydraulic premium shrinks as the boat gets bigger: on a 4,000-pound boat hydraulic costs almost twice as much, on a 10,000-pound boat it is a third more. Our dock load ratings guide covers what the dock itself has to carry.
Installed Cost vs Equipment-Only: What Are You Paying For?
An online price for a lift is the equipment, crated, at a warehouse. The installed number has four or five more lines in it. Here is a typical 6,000-pound electric cable lift, retrofitted to an existing aluminum dock on Lake Travis.
| Line item | Typical cost | Notes |
|---|---|---|
| Lift equipment (frame, cradle, winch, cables) | $4,000 to $6,500 | The online price. Freight to Austin adds $300 to $800. |
| Installation labor | $1,200 to $2,500 | Two people, one day, including barge or trailer access and the load test. |
| Electrical run and GFCI circuit | $500 to $1,500 | Depends on distance from the panel; a long run up a steep Lake Travis lot is the top of the range. |
| Dock reinforcement | $0 to $2,500 | Needed when the frame or floats were not built for the lift’s point loads. We tell you before you buy the lift. |
| Remote control package | $400 to $900 | Standard on most hydraulic lifts, optional on cable. |
| Canopy | $2,000 to $4,500 | Skip it if the slip is already covered. |
| Installed total | $6,500 to $12,000 | Without canopy. Matches the $5,000 to $10,000 and $9,000 to $15,000 bands above. |
Basis: Longhorn Docks proposals, 2025 to 2026. A PWC port has almost no labor line; a large hydraulic lift has a bigger electrical line because the pump needs its own circuit.
When you compare quotes, make sure every one is an installed price with the same lines in it. A quote that is $2,000 lower usually left out the electrical run or the reinforcement, and you pay for both anyway.
Retrofit vs New Dock Build: Which Costs Less?
Adding a lift during a new dock build runs 10 to 20 percent less than retrofitting the same lift later. The frame is engineered for the point loads from the start, the electrical is roughed in with the dock wiring, the crew is already on site with the barge, and there is no second mobilization.
A retrofit is still the right call when the dock has 15 or more years left in it. The check we run first is the frame: aluminum and steel frames in good condition carry a lift with little or no reinforcement, while a wood-framed dock almost always needs new beams under the slip, which is the $2,500 reinforcement line above. If the dock is close to the end of its life, it is often cheaper to fold the lift into a renovation than to reinforce an old frame twice.
Boat Lift Prices by Brand
We install and service the major brands sold in Central Texas and match the brand to the boat and the dock rather than pushing one line. These are the ones you will see most on Lake Travis and Lake Austin, with installed bands for a typical 6,000 to 10,000-pound lift.
| Brand | Lift types | Installed band, 6,000 to 10,000 lb | Where it fits |
|---|---|---|---|
| HydroHoist | Floating hydro-pneumatic | $11,000 to $18,000 | Floating docks on Lake Travis; the lift floats with the dock |
| Sunstream | Hydraulic, including floating-dock models | $13,000 to $20,000 | Wake boats that go out daily; fastest cycle times |
| RGC Marine | Hydraulic and cable, high capacity | $10,000 to $19,000 | Larger cruisers and fixed docks on Lake Austin |
| ShoreStation | Electric cable, some hydraulic | $7,000 to $13,000 | The dependable mid-range for runabouts and pontoons |
| ShoreMaster | Electric cable, vertical and cantilever | $6,500 to $12,000 | Value cable lifts with easy-to-source parts |
Basis: Longhorn Docks proposals and dealer price lists, 2025 to 2026. Brand bands overlap because capacity and options matter more than the badge; a 10,000-pound ShoreStation can cost more than a 6,000-pound Sunstream.
What brand mostly changes is maintenance and parts, not the up-front number. Cable lifts from any of these makers want a cable inspection every spring and new cables every five to eight years. Hydraulic lifts have no cables to fray but a cylinder seal or pump will eventually need a repair in the $1,200 to $4,000 range. The cable versus hydraulic guide goes deeper on that trade.
What Moves a Boat Lift Quote Up or Down?
Loaded weight. The single biggest factor. Every 2,000 pounds of capacity adds roughly $1,500 to $2,500 to a cable lift and $2,000 to $3,500 to a hydraulic one.
Cable or hydraulic. Hydraulic adds $3,000 to $6,000 on a mid-size lift. You buy speed, quiet, a remote, and no cables.
The dock frame. Aluminum and steel frames usually carry a lift as-is. Wood frames and undersized float systems need reinforcement before the lift goes on, and we price that line before you order the lift so there is no surprise.
Floating or fixed dock. A lift on a floating dock on Lake Travis needs mounts and a float system rated for the extra weight, which is why the HydroHoist-style floating lift is popular there: no cradle below the dock to ground out when the lake drops. On a fixed dock on Lake Austin, a standard cradle lift is simpler and cheaper.
Electrical. Power already at the dock saves $500 to $1,500. A long run from the house up a steep lot is the most common hidden cost on Lake Travis.
Water depth. A cradle lift needs enough depth to drop fully below the hull at the lowest lake level you see. If the slip is too shallow, the fix is dredging or a floating-style lift, and either changes the quote.
Corrosion protection. Galvanized is standard. Stainless cables and hardware add $300 to $800 and last longer in a lake that swings 30 feet a year and leaves hardware wet and dry in turns.
Season. Spring is the busiest window. A lift ordered in the fall is usually installed faster and sometimes carries a dealer discount.
What Does a Boat Lift Cost to Own?
Budget $250 to $400 a year for a spring service visit: cables, grease, fluid, adjustment and a load test. Cable lifts need new cables every five to eight years at $300 to $700 per cable, installed. Typical repairs over a lift’s life run $300 to $2,500 each, with a hydraulic cylinder or pump at the top of that range. A well-kept cable lift lasts 15 to 20 years on Lake Travis; a hydraulic lift 20 or more. Replacement costs about the same as a new install minus any reinforcement already done.
Set against that, a lift stops the hull sitting in the water all season, which on these lakes means no bottom paint, less algae and scum-line cleaning, fewer blister repairs and a better resale number. Our guide on whether a boat lift is worth it runs the math for a typical Lake Travis owner.
Boat Lift Cost FAQs
How much does a boat lift cost installed in Austin?
$2,500 to $25,000 installed on Lake Travis and Lake Austin. A PWC port is $2,500 to $5,000, a cable lift for most runabouts and wake boats $5,000 to $15,000, and a hydraulic lift $12,000 to $25,000 or more. Adding the lift during a new dock build runs 10 to 20 percent less.
How much does a 6,000 lb boat lift cost?
$6,500 to $10,000 installed as an electric cable lift, or $11,000 to $15,000 as a hydraulic lift. Those figures include labor, electrical hookup and a load test; a canopy adds $2,000 to $4,500.
Is a hydraulic boat lift worth the extra cost?
For a boat over about 8,000 pounds loaded, or one that goes out most days, yes. It cycles in about a minute, has no cables to replace and usually includes a remote. For a runabout or pontoon that goes out on weekends, a cable lift does the same job for $3,000 to $6,000 less.
Can I install a boat lift on my existing dock?
Usually. Aluminum and steel frames in good condition carry a lift with little or no reinforcement. Wood-framed docks and undersized float systems need new beams or floats first, which adds up to $2,500. We check the frame before you order the lift.
How much does boat lift maintenance cost per year?
$250 to $400 for a spring service visit, plus cables every five to eight years on a cable lift at $300 to $700 each. Repairs, when needed, run $300 to $2,500.
How We Priced This Guide
The ranges come from Longhorn Docks boat lift proposals written in 2025 and 2026 for docks on Lake Travis and Lake Austin, cross-checked against the current dealer price lists for the brands in the table. We update the figures every October and change the year in the title only when the numbers change. If you want a number for your boat and your dock rather than a range, send us the boat’s loaded weight and a photo of the slip and we will quote it within a week. Start on our boat lift installation page or call (512) 200-4244.